ZheJiang Tonghui Mining Crusher Machinery Co., Ltd.
Tonghui will continue to hold the TONGHUI spirit. Our Honest and Trust Worthy in business will lead us to satisfy more and more customers around the world.
Add to Cart
Heavy-duty Jaw Crusher Stone Ore Rock Crushing Machine
Jaw crusher is widely used in various industries, such as mining, road and railway construction, building construction,etc. It could crush kinds of ores and stones with compression strength less than 320MPa, such as quartz, granite, limestone, river stone, sandstone, shale, iron ore, copper ore, etc. Jaw crushers are typically used as primary crushers, or the first step in the process of reducing rock. They typically crush using compression. The rock is dropped between two rigid pieces of metal, one of which then move inwards towards the rock, and the rock is crushed because it has a lower breaking point than the opposing metal piece.
| Model | Feed Opening Size | Max.Feed Size | Capacity | Power | Overall Size | Weight |
| PE-1200x1500 | 1200*1500mm | 1020mm | 400-800t/h | 220kW | 4800*3200*4120mm | 92000kgs |
Working Principle:
The motor transmits power through belt, drives the moving jaw to do periodic motion towards the fixed jaw by the eccentric shaft. The angle between toggle plate and moving jaw plate increases when moving jaw moves . So the moving jaw moves towards the fixed jaw. The stuff will be crushed in this process. The angle between toggle plate and moving jaw decreases when moving jaw moves down, the moving jaw moves leaves fixed jaw by pulling rod and spring, the final crushed stuff will be discharged from the outlet.
Features:
| 1 | big crushing ratio |
| 2 | uniform products size |
| 3 | easy maintenance |
| 4 | long useful lifetime |
Services:
Service is one of the most important parts in the whole business. We are always devoted to meeting customer’s need. We insist on providing customers with one-stop service, from model choosing, installation and test run, personnel training, technical support to maintenance.
Before service: Before the contract is signed, we will act as a good adviser and assistant to help customers choose the most suitable equipment and production line, all for the capacity increasing and cost reducing. We design and produce machines according to the actual requirements of customers.
During and after service: After the contract is signed, (1)we will send our most experienced technicians to make an inspection of the working site, (2)our technicians will help customers make a decision on site planning and designing, (3)technology department will offer a installation foundation drawing, (4)finally, technicians will assist customer in the construction. When all the equipment has been delivered to the site, our company will send staff to assist customer in installation and run test. Our company will also provide customer with free training to help customer master the use and simple maintenance of the machines. Once the machine is out of order at work, our company will set up a clear solution during 24 hours after customer’s phone call. Recover the production first, and then ascertain where responsibility lies.
FAQ:
1. Installation:
If the buyer ask the seller to send the technicians to guard to install the machines in the site, the buyer should take all the charges for the technicians and pay the salary.
2. What about Warranty?
Hi, Ours Warranty is 1 year for whole machinery .
Spare parts. For wear parts, we guarantee the high quality parts for long-term supply for Crusher.
3. Payment Method:
By L/C, T/T.